How To Enhance The Waterproof Performance Of Plastic Fixed Cable Waterproof Joints

Many times, there are many connection points between continuous lines, and each connection point needs to be fixed with a connector. This requires the use of Nylon Cable Gland to lock and fix the incoming and outgoing lines to ensure that the lines are not infiltrated with water, dust, or misaligned.

As a professional connection device, the plastic fixed cable waterproof connector needs to have good waterproof function.

After the terminal is crimped, waterproof filling glue and self-adhesive waterproof tape can be coiled around the terminal. In this way, the waterproof performance of the connector will be enhanced even in a relatively harsh environment. The specific method is

1. Fill the waterproof filling glue, and coil one or more layers of self-adhesive waterproof tape on the outer layer of the filling glue, but be careful not to wrap it too thick, so that the insulation tube cannot be put in.

2. Put on the heat shrink tube.

3. Wrap some self-adhesive waterproof tape on both sides of the heat shrink tube, heat and shorten the sheath tube.

It should be noted that during the use of the plastic fixed cable waterproof connector, it is necessary to pay attention to the size and size, purchase qualified products, and ensure that the product has excellent waterproof performance.